Machine embroidered snake plant in a pot iron-on patch. Plant pot in shades of red and orange. Plant is green, dark green, and purple.
Machine embroidered snake plant iron-on patch on cut leg denim covering knee.
Back of machine embroidered calathea plant in pot. Clear adhesive shows thread through the back.
Gif: cut out denim leg. Cuts from bare knee to large snake plant embroidered patch to small snake plant embroidered patch covering knee of leg.
Hot pink knit hat with snake plant embroidered patch on right corner.
Gif: hot pink knitted hat changes from no patch to small snake plant patch to large snake plant patch.

Small Snake Plant Iron-On Patch

   

Regular price $17.00
Unit price  per 
Shipping calculated at checkout.

Repair your clothing with a snake iron-on patch! Patch a rip in your denim pants or jacket. Or add flair to any garment. Make your clothes "handmade chic"!

All patches are:

  • One of a kind
Check out this video on how they were made here: 
  • Machine embroidered
  • Backed with permanent iron-on adhesive
  • Shades of red and orange plant pot; green, dark green, and purple leaves. 
  • Dimensions, approximate: 3.5" (9.3 cm) x 2.5" (6.5 cm) end to end
  • Note: paper backing has already been removed

Make sure you know where you want this snake plant to end up, these patches are permanent once ironed on.

This patch is best for denim, twill and worker-type coats (think corduroy or twill). Or add to a bag or knit hat. 

How to apply iron-on patches to your garment: 

  1. Turn on iron to medium/low - medium/hot setting
    1. Medium/low for synthetics
    2. Medium/hot for cotton 
  2. Remove paper backing
  3. Place patch on garment
  4. If the hole is large, please scrap fabric or paper between the hole and other fabric so it doesn't bond the patch to behind the hole. 
  5. Press patch for 8 seconds
    1. For thicker fabrics, additional time may be required. 
  6. No sewing needed!
  7. Wear it!
  8. Tag #blissjoybull on IG

Extra iron-on adhesive included with purchase; sometimes those little corners need some extra help to bond to the fabric!

  1. Cut adhesive to size needed.
  2. Place on to un-patched area, paper side facing up.
  3. Turn on iron to medium/low - medium/hot setting
    1. Medium/low for synthetics
    2. Medium/hot for cotton 
  4. Press patch for 2 seconds
  5. Remove paper backing and follow instructions, above, to attach the patch to your garment.

Extra iron-on adhesive included with purchase; sometimes those little corners need some extra help to bond to the fabric!

You are supporting two artists with your purchase! These graphics are designed by Adrianne Hawthorne of ponnopozz. 50% of proceeds will be distributed to her. 

Reviews Widgets Here. . .